|
1
|
|
|
2
|
- Founded in 1994
- Offices in Delta BC & Calgary AB
- Specializing in Heat Transfer, Steam & Control for industrial
applications including Oil & Gas, Pulp & Paper, Mining, Chemical
and Power Generation
|
|
3
|
- API Heat Transfer
- Gaumer Electric Process Heaters
- Thermofin
- Super Radiator Coils
- Heat Exchanger Design Inc
- Watson McDaniel
- Direct Contact Inc.
- Trerice
|
|
4
|
- Schmidt Bretten Gasketed Heat Exchangers
- Compact, high performance, low fouling
- Easy to service & modify, expandable
- SS Plates standard, Titanium & other exotic alloys available
- Nitrile, EPDM, Viton, Compressed fiber &
- Teflon Gaskets
- Industrial, Commercial & Sanitary
- Wide Gap Plates
- Quick Quote Turnaround – 1-2 days standard
|
|
5
|
- Basco / Whitlock Shell & Tube Heat Exchangers
- Oil Coolers
- Compressed Gas Intercoolers / Aftercoolers
- Steam Condensers
- Process Fluid Coolers / Heaters
- Black Liquor Heaters
- Many more applications
|
|
6
|
- Electric Process Heaters & Controls
- 45 years in the Oil & Gas industry
- UL and cUL for Heaters in air, water, and oil service for NEMA 12 and
NEMA 4
- UL and cUL for Control Panels for NEMA 4, 4X, 7, and 12
- CSA for Heaters in air, water, and oil service for NEMA 12, 4, and 7
- ASME Section VIII "U" stamp for pressure vessels
|
|
7
|
- Hot Oil Skid Packages
- Vaporizer Systems
- Glycol & Fuel Heating Skids
- Glycol Reboilers
- Tanks & Ovens
- Process Air Heaters
- Flanged Immersion Heaters
- Circulation Heaters
|
|
8
|
- Quebec based manufacturer of Heat Exchangers
- Founded in 1993 to serve the Industrial Heat Exchanger markets including
Pulp & Paper, Oil & Gas, Chemical, Energy, Heat Recovery,
Electrical Generation & Transmission and HVAC
- ASME, CSA, CRN, TEMA, API
- ISO 9001 Certified
|
|
9
|
- Water, Glycol & Steam Coils
- Freeze Proof Coils
- Removable Cover Plate Coils
- Condensing & Evaporating Process Coils
- Bearing Coolers
- Extruded Aluminum Fin Tube
- Stainless Steel Cased Unit Heaters
|
|
10
|
- Shell & Tube Heat Exchangers
- TEMA Designs
- Engineering / Design Capabilities for new applications
- Repair & Reconditioning
- Re-Tubing
- Replacement Tube Bundles
|
|
11
|
- Motor, Bearing & Transformer Coolers
- Forced Air / Forced Oil & Convection Oil Transformer Coolers
- Water Cooled Transformer Coolers
- Double Wall Bearing Coolers
- Skid Mounted Auxiliary Cooler Solutions
|
|
12
|
- Custom & OEM Coil Manufacturer
- Founded in 1928
- Manufactures Commercial & Industrial Coils
- Manufacturing locations in Arizona, Minnesota & Virginia
- ASME “U”, “UM”, “N” &
“NPT” Stamps
- ASHRAE ARI 410
- UL & CE
- CRN & ABSA Approvals
|
|
13
|
- Commercial, Industrial & Custom & OEM Coils
- Chilled Water, Glycol, Steam & Thermal Oil Coils
- Brine, Condenser & Evaporator Applications
- Plug Box & Slab Headers
|
|
14
|
- Over 20 years of manufacturing Hairpin and Shell & Tube heat
exchangers
- ASME, TEMA, API & CRN Standards
- Hairpin, Shell & Tube
- Fuel Oil Heaters, Tank Heaters
- Glycol Exchangers
- Waste Heat Boilers, UOP Non-Freeze Vaporizers
|
|
15
|
- Hairpin Exchangers from 1 ½” to 20” diameter, full
vacuum to over 10,000psi
- Double Pipe, bare or finned tubes
- Rod-Through Type for heavy fouling applications
- “A” Channel Type for cleaning without disconnecting piping
- Separated Head Closure Type for high pressure / temperature applications
- Slurry Heat Exchangers
|
|
16
|
- Electric & Non-Electric Condensate Pumps
- Pressure Motive Pump skid packages
- Standard & Custom Systems, simplex, duplex, triplex & quadraplex
- Inconel Compression Springs, Stainless Steel Check Valves
|
|
17
|
|
|
18
|
- Founded in 1992 to design & manufacture Heat Recovery Systems
- Original design was for a Heat Recovery system capable of handling
fibers in a pulp mill white water stream
- Reduces Fuel use, Water use & CO2 emmisions
- Typical applications include Natural Gas boiler exhaust, Hog Fuel boiler
exhaust, Gypsum wallboard calciner vent & Miscellaneous vents off
groundwood refiner
|
|
19
|
- Seattle Steam Company
- Client Profile: District
Heating System; Natural Gas Boiler Exhaust
- Project Type: Equipment,
Project/Structural Engineering and Project Oversight
- Promised Heat Recovery: 8.190 MM BTU/hr; Actual: 10.4 MM BTU/hr
- Water Recovery Rate: 5-MM
GPY
- Nippon Paper Company (formerly Daishowa)
- Client Profile: Pulp &
Paper; Hog Fuel Boiler Exhaust (3rd DCI system on site)
- Project Type: Equipment,
Project/Structural Engineering and Project Oversight
- Promised Heat Recovery:
20-MM BTU/hr; Actual:
26-MM BTU/hr
- Condenser Water Wasted
- (Confidential) Gypsum Manufacturer
- Client Profile:
Gypsum-Wallboard Production; C-P Mill Exhaust
- Type of Installation:
Turnkey
- Promised Heat Recovery:
6.2-MM BTU/hr; Actual:
8.35-MM BTU/hr
- Water Recovery Rate: 11,000 lbs/hr; 9-million GPY
|
|
20
|
- Seattle Steam Company installed a DCI system on their boiler and now
reports a savings of $2,500.00 per day in fuel (based on $6 / million
BTU), overall efficiency improved by 6.3%
- Vapor condensation in stack added 1975 gal/hr to the boiler feedwater,
about 7% of their requirements
|
|
21
|
- Installation at Nippon Paper on Hog Fuel Boiler Exhaust
|
|
22
|
- Manufacturer of Instrumentation & Controls since 1923
- Wide range of Thermometers for Commercial & Industrial applications
- Industrial and HVAC style Pressure Gauges & Diaphragm Seals
- Self Operated, Pneumatic & Electric Control Valves
- Self Op Valves specifically for Oil Field Applications
|
|
23
|
- Contact Information:
- Alberta Office:
- #947 – 105, 150 Crowfoot Crescent NW
- Calgary, AB, T3G3T2
- Phone: 403-208-7500 Fax: 403-208-7250
- British Columbia Office:
- #3-7218 Progress Way
- Delta, BC, V4G1H2
- Phone: 604-940-4266 Fax: 604-940-1478
|
Notes
