|
 |
 |
| What's New at Bay Industrial |
Office Locations:
British Columbia
Alberta |
| |
| www.bayindustrialvalve.com is our new website containing valves, instrumentation, pre-insulated pipe and steam specialties |
| |
| NIAGARA BLOWER |
| |
 WSAC
Founded in 1904, Niagara Blower Company began as a manufacturer of high quality industrial air conditioning and heating equipment. Since that time Niagara Blower has transitioned into other heat transfer ventures and has earned a reputation for developing innovative, engineered solutions for heat transfer applications The Wet Surface Air Cooled (WSAC) heat exchanger products are optimized for industrial applications where rugged design/fabrication and cost effective, efficient, closed-loop cooling/condensing are required. WSAC heat exchangers have clear advantages in many applications involving liquid cooling or vapor condensing. WSACs have been successfully utilized in industries such as: power, steel, refining, chemical and petro chemical processing and the food/ beverage industries.
More information visit the Niagara Blower website at www.niagarablower.com |
|
| |
No-Frost
Niagara “No-Frost” systems are used in Spiral Freezers, Holding Freezers & Holding Coolers. In Spiral Freezers the “No-Frost” system maximizes throughput/output with continuous operation with no defrost required as well as continuously sanitizing the coils with no shut down required. In Freezers & Coolers the “No-Frost” system provides a frost and ice free environment while eliminate the breeding ground for bacteria. This maintains product integrity & quality while also improving safety and providing consistent space temperature and airflow as well as reducing energy costs.
“No-Frost” systems also compliment installations that include or already have traditional refrigeration. By placing the Niagara conditioner at the point of moisture infiltration, the Niagara conditioner will increase the efficiency of the traditional cooling system by reducing defrost cycles, thus reducing energy usage. |
| |
Liquid Desiccant Dehumidification
Commonly used in Breweries and Meat Packaging / Processing plants, Niagara’s system is a Glycol based desiccant that is food grade and non-corrosive. This system helps with airborne bacteria control as well as reduced energy costs. The system has the ability to handle large moisture loads as well as recovery quickly from wash down cycles. The condensation control system allows the ability to maintain precise room temperature and relative humidity levels. |
| |
| |
| FABSCO |
| |
 FABSCOSpecializing in API 661 designs, Fabsco Fin-Air, LLC, manufactures and sells air cooled heat exchangers for applications in:
● Condensing
● Gas Compression
● Petrochemical
● Petroleum Refining
● Power Generation
● Refrigeration
-Fabsco uses the latest thermal design software from the Heat Transfer Research Institute (ACE), and Aspentech (ACX)
-Fabsco tube bundles are designed and fabricated in accordance with ASME -Section VIII, Div. 1.
-Fabsco’s proprietary parametric structural design, and 3D modeling system help limit vibration to 20% below the API 661 allowable amplitude.
|
|
| |
| |
| ABOUT API HEAT TRANSFER TECHNOLOGIES CORPORATION |
| |
 API
Heat Transfer Technologies Corporation, established in 1957
as Basco, manufactures a wide range of heat transfer products
including shell-and-tube heat exchangers, plate heat exchangers,
plate fin heat exchangers, air cooled brazed aluminum heat
exchangers, and other custom and standard design heat exchangers,
manufactured under the Basco®, Whitlock®, Airtech® and
Schmidt® brand names. The company employs over 800 people
worldwide and has production facilities in the United States
(New York), Germany and China. For more information visit
the API Heat Transfer website at www.apiheattransfer.com. |
| |
|
| |
|
| Heat Exchanger Design, Inc. |
|
| |
|
 Heat Exchanger Design, Inc.
has more than 19 years of valuable experience in design and
manufacturing of heat exchangers and pressure vessels for
companies around the globe. HED, is an ASME authorized manufacturer.
We design and fabricate heat exchangers and pressure vessels
according to TEMA, API, ASME Section I and VIII Division
I, and other industry recognized standards as well as full
compliance with customer specification. We also provide the
National Board of Boiler and Pressure Vessels Inspectors
Registration for any vessels manufactured according to ASME
code. For
more information visit the HED website at www.hed-inc.com.
|
|
| |
|
 |
|
| |
|
| |
|
|
|
