Specializing in API 661 designs, Fabsco Fin-Air, LLC, manufactures and sells air cooled heat exchangers for applications in:
● Condensing
● Gas Compression
● Petrochemical
● Petroleum Refining
● Power Generation
● Refrigeration
-Fabsco uses the latest thermal design software from the Heat Transfer Research Institute (ACE), and Aspentech (ACX)
-Fabsco tube bundles are designed and fabricated in accordance with ASME -Section VIII, Div. 1.
-Fabsco’s proprietary parametric structural design, and 3D modeling system help limit vibration to 20% below the API 661 allowable amplitude.
Maximize throughput/Output with continuous operation (Spiral
freezers).
Continuous operation - No defrost required
Continuously sanitized coil - No shut down required for sanitizing
Continuously sanitized coil - No shut down required for sanitizing
Consistent space temperature/airflow
Airborne bacteria control
Reduced energy usage - Sized to meet the load. No over sizing
required to compensate for defrost cycles
Freezer/Cooler
Frost/ice free environment. Eliminate breading ground for bacteria
Maintain product integrity/quality
Improved safety
Consistent space temperature/airflow
Reduced energy usage
Initial cost of a Niagara "No-Frost" systems is generally higher than
traditional (hot-gas defrost) refrigeration systems. Therefore, we sell
value that the system provides. The "No-Frost" system will also compliment
installations that include (or already have) traditional refrigeration. By
strategically placing the Niagara conditioner at the point of moisture
infiltration (generally above a door), the Niagara conditioner will increase
the efficiency of traditional cooling systems by reducing defrost cycles,
thus reducing energy usage.
Liquid Desiccant Dehumidification
Uses: Brewery/ Meat Packaging and Processing
Benefits:
Condensation control
Asset protection
Glycol based desiccant is food grade and non-corrosive
Airborne bacteria control
Reduced energy usage
Ability to handle large moisture loads
Quick recovery from wash down cycles
Ability to maintain precise room temperature and relative humidities
“Pressure & Temperature Regulators,
Steam Traps & Specialties equal to Sarco, Armstrong & Yarway
Air Vents, Vacuum Breakers & Liquid Drainers
Condensate Pumps & Systems
SRH - Steam Rig Heater The SRH series of heat-exchanger unit heaters is designed for steam applications where boiler neglect can lead to freeze-up conditions. During an accidental freeze-up the SafeDeform™ core headers are designed to accommodate ice expansion. The SRH Series is designed for pressures up to 100 psi in single-pass configurations only. SRH heaters meet ASME requirements with a CRN.
HUH - Hydronic Unit Heater The HUH series of heat-exchanger unit heaters is designed for rugged industrial applications in steam, hot water, glycol or other fluid circulating heating systems. The HUH series is designed for pressures and temperatures up to 400 psi and 550 °F respectively in single-pass and multi-pass core configurations with multi-pass units greatly improving performance characteristics when used with liquids. HUH heaters meet ASME requirements with a CRN.
HHP - Hydronic High Performance Heaters The HHP series of heat-exchanger unit heaters is designed for the most rugged industrial applications in steam, hot water, glycol or other fluid circulating heating systems. The HHP series is designed for pressures and temperatures up to 450 psi and 550 °F respectively. HHP heaters include our PerformaCore™ high-performance heat-exchanger cores that are available in 5/8 in. O.D. 14-gauge (0.083 in.) fin tube with single-pass (for steam or fluids) and multi-pass configurations (for fluids only) to meet your specific requirements.HHP heaters meet ASME requirements with a CRN.
Temperature Sensor Manufacturer, Resistance Temperature Detectors (RTD’s) & Thermocouples, On site manufacturing.
HUH - Hydronic Unit Heater 
